Problem Statment
A manufacturer partnered with 麻豆传媒AV在线看 to reduce the scrap rate of an assembly from 7.7% to under 2% in six months.
Test and Measure
麻豆传媒AV在线看 met with the customer鈥檚 team at their facility to observe the failure modes and define the problem.
Four possible contributors for the high scrap rate were identified. DISHER applied a Design of Experiment (DoE) to assess the relevance of each of the four factors in question. The current state was tested and measured.
Analyze and Recommend
麻豆传媒AV在线看 and the customer analyzed the results from the plant trials and concluded that the screw type was the root cause. It was the most significant factor in causing the defects to occur. Backed by data, the team confirmed a recommendation to implement a design change which replaced the current screws with dog-point screws. The change was approved and implemented by the customer. The team verified the improvement through measurement.
Results
Eighteen months later, the scrap rate went down from 7.7% to .35% on a production rate of 35,000 units a week. 麻豆传媒AV在线看 helped the customer achieve a 95% scrap rate reduction and increased throughput capacity.
Let's get to work!
Ready to Start Your Next Project?
Expertise Across Industries
Customer Satisfaction
Trusted Talent